From the point of view of safety in production, the hand is part of the body affected by the highest injury rate, especially in contact with chemicals. So we choose gloves with particular attention to the time to the chemical properties and physical properties of the gloves, we have to pay attention to the glove permeability. Therefore, the proper selection and use of hand injury prevention safety gloves is particularly important. Gloves permeability mainly two sets of data: the breakthrough time and permeability. 1. penetration time is the time from the start of the test specimen from the other side just to detect chemical substances to the desired. This time represents the gloves when completely submerged in the reagent in time can resist the effective time of penetration. 2. The penetration rate is highest during the test reagent for six hours glove detected through the sample, and the qualitative penetration level is compared to each other and the permeability obtained. If gloves anti-permeability is poor, then we can not use this glove. In addition, if the anti-soaked glove is very good, but it can easily be torn or punctured, then it is still not acceptable. Cut resistance, puncture resistance and anti-friction properties are the key points we choose the product, so you must be thinking. So when choosing the necessary chemical resistant gloves while thinking about the physical properties of the glove. Hanging plastic gloves: www.changshengshoutao.com